C-8080 Wide Zoom Firmware Download


	C-8080 Wide Zoom

Following terms will be revised by the update:

By taking certain type of route in camera operation, malfunction of AF or the camera not accepting any button operation occurs.

In Exif Viewer, CAMEDIA Master and Olympus Studio software, information of the focal length (Exif-information) in 35mm photography appears to be incorrect.

[ Notice ]

- You cannot return to the previous version of firmware after the update.


	-	The digital camera may be damaged if the update is unsuccessful. Please read the instructions on this page as well as the instructions and notices in the manual handbook carefully.
	-	If you would like to contact us regarding firmwares updates, please click one of the links below. http://asia.olympus-global.com/support/distributor/

- The targeted digital camera

- USB cable (Included in the digital camera original package)

- New battery (fully charged), or an AC adapter

- PC with minimum specifications listed below

-	Operating systems: Pre-installed Windows 98, Windows 98 Second Edition, Windows 2000 Professional, Windows Me, or Windows XP
-	Built-in USB port.
	NOTE: Use of a USB hub during the update is not supported and may result in damage to the camera and the camera's firmware.
	*	If you do not have a PC with the above specification, please refer to the link below. http://asia.olympus-global.com/support/distributor/

The installation process will follow the installation summary below. Be sure to read the on-screen instructions during the update. For details, please refer to the firmware download page.

[ Notice ]

-	When using Windows 2000 or XP, you must log in as the Administrator.
-	Windows 98 or 98SE users must install the camera's USB driver prior to the update. For details, please refer to the camera's manual or quick start guide.
-	If the connection between the camera and computer cannot be made, the installation process will not begin.

Downloading the Firmware Update Software

After accepting the license agreement, please select your camera model and download the file to your PC.

Update the Firmware

Double-click on the downloaded file. The firmware update process will begin.

Confirm the update was successful

When the firmware update is finished, the software version information will appear on the camera's display. Please make sure that the new firmware version appears on the display.


NOTE: Please read the following terms and conditions carefully before loading down this Software.
Any user ("User") is deemed to have acknowledged and accepted the following terms and conditions which are proposed by OLYMPUS IMAGING CORPORATION ("Olympus"), when the User loads down the Software in the User's computer, and simultaneously, this Software License Agreement are deemed to be fully executed by and between the User and Olympus.
1.	Subject to the terms and conditions herein contained, Olympus shall grant to User a non-exclusive and non-transferable license to use the Software and the copy thereof (hereinafter, the copy of the Software are included in the Software) only for the purpose of applying to the Olympus products which is introduced and accepted by Olympus.
2.	User shall be prohibited to do or perform the following matters.
	(1)	To make any copy of the Software, whether in whole or in part, for any other purpose than back-up purpose.
	(2)	To sell, distribute or upload the Software, whether in whole or in part.
	(3)	To change, modify, reverse engineer, decompile or disassemble the Software, whether in whole or in part.
	(4)	To rent, lease or sublicense the Software, whether in whole or in part.
	(5)	To export the Software, directly or indirectly, whether in whole or in part, without obtaining necessary approvals of relevant governmental authority in Japan or in any relevant country.
3.	Any right, title or interest in and to the Software shall be owned by or vested to Olympus or its licensor respectively.
4.	USER ACKNOWLEGDES AND UNDERSTANDS THAT THE SOFTWARE IS PROVIDED TO USER ON AN "AS-IS" BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO:
	(1)	WARRANTIES FOR MERCHANTABILITY AND/OR FITNESS FOR A USER'S PARTICULAR PURPOSE.
	(2)	WARRANTY FOR NO BUG, ERROR, FAILURE OR DEFECTS IN THE SOFTWARE; OR
	(3)	WARRANTIES FOR NON-INFRINGEMENT OF RIGHTS OR INTERESTS OF ANY THIRD PARTY, INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHT.
5.	IN NO EVENT SHALL OLYMPUS BE LIABLE NOR RESPONSIBLE FOR ANY DAMAGES SUFFERED OR INCURRED BY USER OR ANY OTHER THIRD PARTY (INCLUDING, BUT NOT LIMITED TO, GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGES INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION AND THE LIKE), ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE.
6.	If User fails in complying with any terms and conditions under this Agreement, Olympus may terminate this Agreement and seek to remedy for any loss or damage, including damages for loss of business profit, business interpretation, loss of business information and the like) or loss of profit incurred by Olympus, arising out of or in connection with such User's failure. In such event, User shall immediately destroy or return to Olympus any and all copies thereof, whether in whole or in part.