Question:
How can I change or add the language to the camera by using OLYMPUS Master/ Plus?

Answer:
Please see the following.

Description:
Here is the description of the operation in OLYMPUS Master Plus Ver. 1.0.

Please follow the steps below:

1. Click the [Browse Images] icon.
   Before you connect your camera with the computer, please start OLYMPUS Master and click [Browse Images] icon on the OLYMPUS Master main menu.
   
   
   
   
   
   
   
2. From the [Online Service] menu in the [Browse] window, select [Update Camera].
   Please click [Online Service] button in the toolbar located at the top of the window, and select [ Update Camera ] from the pull-down menu.
   
   
   
   
   
   
   
3. Connecting the camera to a computer.
   Please connect the digital camera to your computer using a USB cable.
   
   
   
   
   
   
   
   
4. Follow the instructions on the screen to access the OLYMPUS server.
   When connected to the server, [Update Camera] dialog box appears. Please click [OK] button.
   
   
   
   
   
   
   
5. Click the [Check for latest version] button.
   When the following windows appears, please click [Check for latest version] button.
   
   
   
   
   
   

   Caution: An error message may be displayed, if you click [Cancel] button and remove a camera from a computer. When an error message is displayed, please exit OLYMPUS Master first and remove a camera from a computer.

   
   
   
6. Select the additional language.
   Please select the firmware and the language you want to add from the pull-down menu, and then click [Update] button to go on.
   *Here comes the case when you selected "Swedish".
   
   
   
   
   
   
   
   
7. Click the [Next] button.
   When OK is displayed on the LCD display of the digital camera, as shown on the right in the dialg box bilow, downloading the addtional language is complete. Please click [Next] button.
   
   
   
   
   
   
   
8. Click the [Close] button.
   When the following windows appears, please disconnect the camera from you computer and click [Close] button.
   (*It looks like different under different OSs.)
   
   (1) The following instructions apply to Windows XP/ 2000/ 98SE.
   
   
   
   
   (2) The following instructions apply to Windows Me.