| |
 |
| |
MR-100
|
|
 |
| |
Firmware Ver.2.17V has incorporated
the following upgrade. |
|
| - |
Raised up the maximum allowable volume. |
| |
| * |
Turn down the volume to the minimum when wearing
earphones to avoid stimulus to ear.
|
| * |
When you turn up the volume too high,
it may cause a hearing disorder or a hearing loss. |
|
| - |
Improved the rare case that the volume is out of control
in using with some remote control. |
| - |
Improved the case that the device does not play back the
tracks of a music album in numerical order. |
| - |
Improved the case that occasionally there is some noise
in the MP3 music files. |
| |
 |
| * Upgrade
history * |
| Firmware Ver.2.13 has incorporated
the following upgrade. |
| - |
Resolve the "Fatal System Error 004". |
| - |
When updating the available track information by synchronizing
with the m:trip, the startup window of the MR-100 freezes
OR the LED lamp is kept lighting up and the power of the
device cannot be turned OFF. |
| - |
Unstable operationality with the use of a
remote control. |
| - |
Acceptability for the special symbols such
as "/" or "&" in track information entry. |
 |
| |
- |
MR-100 may be damaged if the update is unsuccessful.
Please read the instructions on this page as well as the
instructions and notices in the manual handbook carefully. |
|
| |
- |
You
cannot return to the previous version of firmware after
the update. |
|
| |
- |
If you would like to contact us regarding
firmwares updates, please click one of the links below.
http://asia.olympus-global.com/support/distributor/ |
|
 |
| |
- MR-100 |
|
| |
- Cradle |
|
| |
- USB cable (Included in the digital camera
original package) |
|
| |
- AC adapter |
|
| |
- PC with minimum specifications listed below |
|
| |
| - |
Operating systems: Pre-installed
Windows 2000 Professional (Service Pack
3 or later) or Windows XP Professional/
Home Edition |
| - |
Built-in USB port. |
| |
NOTE: Use of a USB hub
during the update is not supported and
may result in damage to MR-100 and the
firmware. |
| |
* |
If you do not have a PC with the above
specification, please refer to the link
below.
|
|
|
|
|
 |
| |
The installation process
will follow the installation summary below. Be sure to read
the on-screen instructions during the update. |
|
| |
1. |
Download the Firmware Update
Software |
|
| |
|
After accepting the license agreement, please
download the file to your PC. |
|
| |
2. |
Update the Firmware |
|
| |
|
Double-click on the downloaded file. The firmware
update process will begin. |
|
| |
3. |
Connect to your computer |
|
| |
|
Connect the cradle to the computer using the
bundled USB cable, and place your MR-100 in its cradle. |
|
| |
4. |
Synchronize between MR-100
and m:trip |
|
| |
|
Please follow the on-screen instructions to
synchronize between MR-100 and m:trip.
| * |
If you
use without synchronizing, management data may not
be updated. Be sure to synchronize MR-100 and m:trip. |
|
|
| |
5. |
Transfer the new firmware
into MR-100 |
|
| |
|
A firmware update comfirmation
dialog window will appear. To follow the procedure on the
screen, firmware updater is transferred to MR-100. |
|
| |
6. |
Remove the USB
cable from the computer |
|
| |
|
After removing the USB cable from the computer,
MR-100 will automatically begin updating the firmware.
| * |
DO NOT
disconnect the AC adapter while the firmware is updating
automatically. |
|
| |
7. |
Confirm the update
was successful |
| |
|
Please follow the on-screen instructions
to make sure of the new firmware version. |
 |
| |
NOTE: Please
read the following terms and conditions carefully before
loading down this Software. |
|
| |
Any user ("User") is deemed to have acknowledged
and accepted the following terms and conditions which are
proposed by OLYMPUS IMAGING CORPORATION ("Olympus"),
when the User loads down the Software in the User's computer,
and simultaneously, this Software License Agreement are
deemed to be fully executed by and between the User and
Olympus. |
|
| |
1. |
Subject to the terms and conditions herein contained,
Olympus shall grant to User a non-exclusive and non-transferable
license to use the Software and the copy thereof (hereinafter,
the copy of the Software are included in the Software) only
for the purpose of applying to the Olympus products which
is introduced and accepted by Olympus. |
|
| |
2. |
User shall be prohibited to do or perform the
following matters. |
|
| |
|
(1) |
To make any copy of the Software, whether in whole or
in part, for any other purpose than back-up purpose. |
|
| |
|
(2) |
To sell, distribute or upload the Software, whether in
whole or in part. |
|
| |
|
(3) |
To change, modify, reverse engineer, decompile or disassemble
the Software, whether in whole or in part. |
|
| |
|
(4) |
To rent, lease or sublicense the Software, whether in
whole or in part. |
|
| |
|
(5) |
To export the Software, directly or indirectly, whether
in whole or in part, without obtaining necessary approvals
of relevant governmental authority in Japan or in any relevant
country. |
|
| |
3. |
Any right, title or interest in and to the Software
shall be owned by or vested to Olympus or its licensor respectively. |
|
| |
4. |
USER ACKNOWLEGDES AND UNDERSTANDS THAT THE SOFTWARE
IS PROVIDED TO USER ON AN "AS-IS" BASIS WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO: |
|
| |
|
(1) |
WARRANTIES FOR MERCHANTABILITY AND/OR FITNESS FOR A USER'S
PARTICULAR PURPOSE. |
|
| |
|
(2) |
WARRANTY FOR NO BUG, ERROR, FAILURE OR DEFECTS IN THE
SOFTWARE; OR |
|
| |
|
(3) |
WARRANTIES FOR NON-INFRINGEMENT OF RIGHTS OR INTERESTS
OF ANY THIRD PARTY, INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL
PROPERTY RIGHT. |
|
| |
5. |
IN NO EVENT SHALL OLYMPUS BE LIABLE NOR RESPONSIBLE
FOR ANY DAMAGES SUFFERED OR INCURRED BY USER OR ANY OTHER
THIRD PARTY (INCLUDING, BUT NOT LIMITED TO, GENERAL, SPECIAL,
DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGES
INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, LOSS OF BUSINESS INFORMATION AND THE LIKE),
ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE. |
|
| |
6. |
If User fails in complying with any terms and
conditions under this Agreement, Olympus may terminate this
Agreement and seek to remedy for any loss or damage, including
damages for loss of business profit, business interpretation,
loss of business information and the like) or loss of profit
incurred by Olympus, arising out of or in connection with
such User's failure. In such event, User shall immediately
destroy or return to Olympus any and all copies thereof,
whether in whole or in part. |
|
|
|
|
|
|
|
